Comimark 1Pcs Drv8871 H Bridge Dc Motor Driver Breakout Board Pwm Control Module 3.6A For Arduino

1 Features1? H-Bridge Motor Driver- Drives One Dc Motor, One Winding Of Astepper Motor, Or Other Loads? Wide 6.5-V To 45-V Operating Voltage? 565-Mo Typical Rds(On) (Hs + Ls)? 3.6-A Peak Current Drive? Pwm Control Interface? Current Regulation Without A Sense Resistor? Low-Power Sleep Mode? Small Package And Footprint- 8-Pin Hsop With Powerpad?- 4.9 6 Mm? Integrated Protection Features- Vm Undervoltage Lockout (Uvlo)- Overcurrent Protection (Ocp)- Thermal Shutdown (Tsd)- Automatic Fault Recovery2 Applications? Printers? Appliances? Industrial Equipment? Other Mechatronic Applications3 Descriptionthe Drv8871 Device Is A Brushed-Dc Motor Driverfor Printers, Appliances, Industrial Equipment, Andother Small Machines. Two Logic Inputs Control The Hbridgedriver, Which Consists Of Four N-Channelmosfets That Can Control Motors Bidirectionally Withup To 3.6-A Peak Current. The Inputs Can Be Pulsewidthmodulated (Pwm) To Control Motor Speed, Usinga Choice Of Current-Decay Modes. Setting Both Inputslow Enters A Low-Power Sleep Mode.The Drv8871 Device Has Advanced Currentregulationcircuitry That Does Not Use An Analogvoltage Reference Or External Sense Resistor. Thisnovel Solution Uses A Standard Low-Cost, Low-Powerresistor To Set The Current Threshold. The Ability To Limitcurrent To A Known Level Can Significantly Reduce Thesystem Power Requirements And Bulk Capacitanceneeded To Maintain Stable Voltage, Especially Formotor Startup And Stall Conditions.The Device Is Fully Protected From Faults And Shortcircuits, Including Undervoltage (Uvlo), Overcurrent(Ocp), And Overtemperature (Tsd). When The Faultcondition Is Removed, The Device Auto